Skip to main content

Airflow pools

One of the benefits of Apache Airflow is that it is built to scale. With the right supporting infrastructure, you can run many tasks in parallel seamlessly. Unfortunately, horizontal scalability also necessitates some guardrails. For example, you might have many tasks that interact with the same source system, such as an API or database, that you don't want to overwhelm with requests. Airflow pools are designed for exactly this use case.

Pools allow you to limit parallelism for an arbitrary set of tasks, allowing you to control when your tasks are run. They are often used in cases where you want to limit the number of parallel tasks that do a certain thing. For example, tasks that make requests to the same API or database, or tasks that run on a GPU node of a Kubernetes cluster.

In this guide, you'll learn basic Airflow pool concepts, how to create and assign pools, and what you can and can't do with pools. You'll also implement some sample DAGs that use pools to fulfill simple requirements.

Other ways to learn

There are multiple resources for learning about this topic. See also:

Assumed knowledge

To get the most out of this guide, you should have an understanding of:

Create a pool

There are three ways you can create and manage pools in Airflow:

  • The Airflow UI: Go to Admin > Pools and add a new record. You can define a name, the number of slots, and a description.

    Pools UI

  • The Airflow CLI: Run the airflow pools command with the set subcommand to create a new pool. See the Airflow CLI documentation for the full list of pool commands. With the Airflow CLI, you can also import pools from a JSON file with the import subcommand. This can be useful if you have a large number of pools to define and doing so programmatically would be more efficient.

  • The Airflow REST API: This option is available with Airflow version 2.0 and later. To create a pool, submit a POST request with the name and number of slots as the payload. For more information on working with pools from the API, see the API documentation.

Assign tasks to a pool

By default, all tasks in Airflow get assigned to the default_pool which has 128 slots. You can modify the number of slots, but you can't remove the default pool. Tasks can be assigned to other pools by updating the pool parameter. This parameter is part of the BaseOperator, so it can be used with any operator.

@task(task_id="task_a", pool="single_task_pool")
def sleep_function():

When tasks are assigned to a pool, they are scheduled as normal until all of the pool's slots are filled. As slots become available, the remaining queued tasks start running.

If you assign a task to a pool that doesn't exist, then the task isn't scheduled when the DAG runs. There are currently no errors or checks for this in the Airflow UI, so be sure to double check the name of the pool that you're assigning a task to.

You can control which tasks in the pool run first by assigning priority weights. These are assigned at the pool level with the priority_weights parameter. The values can be any arbitrary integer (the default is 1), and higher values get higher priority in the executor queue. In Airflow 2.9 and later, you can define your own custom weight_rule, see Custom Weight Rule.

For example, in the DAG snippet below task_a and task_b are both assigned to the single_task_pool which has one slot. task_b has a priority weight of 2, while task_a has the default priority weight of 1. Therefore, task_b is executed first.

def sleep_function(x):

start_date=datetime(2023, 1, 1),
schedule="*/30 * * * *",
def pool_dag():
sleep_function.override(task_id="task_a", pool="single_task_pool")(5)
task_id="task_b", pool="single_task_pool", priority_weight=2


Additionally, you can configure the number of slots occupied by a task by updating the pool_slots parameter (the default is 1). Modifying this value could be useful in cases where you are using pools to manage resource utilization.

Pool limitations

When working with pools, keep in mind the following limitations:

  • Each task can only be assigned to a single pool.
  • If you are using SubDAGs, pools must be applied directly on tasks inside the SubDAG. Pools set within the SubDAGOperator will not be honored.
  • Pools are meant to control parallelism for task Instances. If you need to place limits on the number of concurrent DagRuns for a single DAG or all DAGs, use the max_active_runs or core.max_active_runs_per_dag parameters.

Example: Limit tasks hitting an API endpoint

This example shows how to implement a pool to control the number of tasks hitting an API endpoint.

In this scenario, five tasks across two different DAGs hit the API and may run concurrently based on the DAG schedules. However, to limit the tasks hitting the API at a time to three, you'll create a pool named api_pool with three slots. You'll also prioritize the tasks in the pool_priority_dag when the pool is full.

In the pool_priority_dag below, all three of the tasks hit the API endpoint and should all be assigned to the pool, so you define the pool argument in the DAG default_args to apply to all tasks. You also want all three of these tasks to have the same priority weight and for them to be prioritized over tasks in the second DAG, so you assign a priority_weight of three as a default argument. This value is arbitrary. To prioritize these tasks, you can assign any integer that is higher than the priority weights defined in the second DAG.

from pendulum import datetime, duration

import requests
from airflow.decorators import dag, task

def api_function(**kwargs):
url = ""
res = requests.get(url)
return res.json()

start_date=datetime(2021, 8, 1),
schedule="*/30 * * * *",
"pool": "api_pool",
"retries": 1,
"retry_delay": duration(minutes=5),
"priority_weight": 3,
def pool_priority_dag():




In the pool_unimportant_dag DAG, there are two tasks that hit the API endpoint that should be assigned to the pool, but there are also two other tasks that do not hit the API. Therefore, you assign the pool and priority weights in the PythonOperator instantiations.

To prioritize task_x over task_y while keeping both at a lower priority than the tasks in the first DAG, you assign task_x a priority weight of 2 and leave task_y with the default priority weight of 1.

from pendulum import datetime, duration
import requests
from airflow.decorators import dag, task
from airflow.operators.empty import EmptyOperator

def api_function(**kwargs):
url = ""
res = requests.get(url)
return res.json()

start_date=datetime(2023, 1, 1),
schedule="*/30 * * * *",
default_args={"retries": 1, "retry_delay": duration(minutes=5)},
def pool_unimportant_dag():
task_w = EmptyOperator(task_id="start")

task_x = api_function.override(

task_y = api_function.override(task_id="task_y", pool="api_pool")()

task_z = EmptyOperator(task_id="end")

task_w >> [task_x, task_y] >> task_z


Was this page helpful?

Sign up for Developer Updates

Get a summary of new Astro features once a month.

You can unsubscribe at any time.
By proceeding you agree to our Privacy Policy, our Website Terms and to receive emails from Astronomer.